Girard Awning Adjustment Troubleshooting: Ultimate Tips for Success

Ensure proper alignment of Girard awning arms and tension adjustment for troubleshooting. Regular maintenance can prevent issues.

Girard awnings provide shade and protection, but occasional adjustments may be necessary for optimal performance. Understanding how to troubleshoot common problems such as misalignment or tension issues can help ensure your awning operates smoothly. This guide will provide you with the necessary steps to address and resolve any adjustment problems you may encounter with your Girard awning.

By following these troubleshooting tips, you can keep your awning in top condition and enjoy its benefits for years to come. Let’s dive into the process of identifying and resolving any issues with your Girard awning adjustment.

Girard Awning Adjustment Troubleshooting
Girard Awning Adjustment Troubleshooting: Ultimate Tips for Success


Common Troubleshooting Issues

Girard awnings are a fantastic addition to any RV, providing shade and comfort on your travels.

Awning Retraction Problems

If your Girard awning is having trouble retracting, check the power source and wiring connections first.

Inspect the awning arms for any obstructions or damage that may be hindering the retraction process.

Awning Fabric Sagging

If you notice your awning fabric sagging, adjust the tension settings on the awning arms to ensure proper support.

Consider replacing the fabric if it has become worn or stretched beyond repair.

Awning Motor Failure

In the event of awning motor failure, check the electrical connections and fuses to identify any issues with the power supply.

Consult the Girard user manual for troubleshooting steps specific to motor failure.

Girard Awning Adjustment Troubleshooting: Ultimate Tips for Success


1. Awning Retraction Problems

Having trouble with Girard awning retraction? Let’s troubleshoot the common issues you may encounter to get your awning working smoothly again.

Check Power Supply

Ensure power source for Girard awning is stable and connected properly. Check if the power cord is plugged securely into a functioning outlet. Avoid any loose connections to the power supply.

Inspect Awning Sensor

Examine the awning sensor for any obstructions or damages. Make sure the sensor is clean and free from debris. Position the sensor properly to ensure it can detect movements accurately.

Reset Awning Control

Try resetting the awning control system to troubleshoot retraction issues. Refer to the user manual for steps on how to perform a reset. Sometimes, a simple reboot can fix temporary glitches in the system.

2. Awning Fabric Sagging

Girard Awning Adjustment Troubleshooting

One common issue that RV owners may encounter with their Girard awning is fabric sagging. This can not only affect the functionality of the awning but also make it less visually appealing. However, with a few simple troubleshooting steps, you can resolve this problem and get your awning back in top shape.

Inspect Tension Adjustments

Start by inspecting the tension adjustments on your Girard awning. The tension adjustments are responsible for keeping the fabric taut and preventing sagging. Ensure that these adjustments are properly tightened to provide adequate tension. Use the manufacturer’s instructions to identify the specific locations of these adjustments on your awning.

Check For Loose Hardware

Loose hardware can also contribute to fabric sagging. Take the time to carefully inspect all the hardware components of your Girard awning, including the brackets, bolts, and screws. Tighten any loose hardware to ensure a secure and stable installation. This will help maintain proper tension and prevent fabric sagging.

Replace Worn-out Fabric

If your Girard awning fabric is worn-out or damaged, it may be the main cause of the sagging. In this case, you’ll need to replace the fabric to restore the awning’s functionality and appearance. Measure the dimensions of your existing fabric and purchase a suitable replacement from the manufacturer or a trusted supplier. Follow the manufacturer’s instructions to install the new fabric properly.

In conclusion, fabric sagging is a common issue with Girard awnings, but it can be easily resolved with the right troubleshooting steps. By inspecting tension adjustments, checking for loose hardware, and replacing worn-out fabric, you can ensure that your awning remains in excellent condition. Remember to refer to the manufacturer’s instructions for specific guidance on your Girard awning model. Enjoy your RV adventures under a sturdy and attractive awning!

3. Awning Motor Failure

Girard awnings are a great addition to any RV, providing shade and protection from the elements. However, like any mechanical system, they can encounter issues from time to time. One common problem that RV owners may face is awning motor failure. When your Girard awning motor malfunctions, it can be frustrating and inconvenient. To diagnose and troubleshoot the issue, follow the steps outlined below.

Check Motor Wiring

If your Girard awning motor is not working, start by inspecting the motor wiring. Loose or damaged wires can cause power interruptions, leading to motor failure. Look for any frayed or disconnected wires, and ensure that all connections are secure and free from corrosion. If any wiring issues are identified, they should be promptly repaired or replaced by a qualified technician.

Test Motor Capacitor

Next, it’s essential to test the motor capacitor. The capacitor is responsible for providing the initial jolt of electricity to start the motor. If the capacitor is faulty or worn out, it can lead to motor failure. Use a multimeter to measure the capacitance of the capacitor and compare it to the manufacturer’s specifications. If the readings are outside the acceptable range, the capacitor should be replaced with a new one compatible with the Girard awning motor.

Replace Faulty Motor

If checking the wiring and testing the capacitor do not resolve the issue, it may be necessary to replace the faulty motor. Over time, motors can wear out due to usage, exposure to the elements, or manufacturing defects. To replace the motor, consult the Girard awning’s user manual for specific instructions, or seek assistance from a qualified RV service technician. Ensure that the replacement motor is compatible with your Girard awning model to restore proper functionality.

Preventive Maintenance Tips

Ensure optimal performance and longevity of your Girard Awning by implementing these preventive maintenance tips. Troubleshoot and adjust your awning with these expert recommendations.

Preventive Maintenance Tips Regular Cleaning Proper maintenance of your Girard awning is crucial for ensuring its longevity and functionality. One of the essential steps in this preventive maintenance is regular cleaning. Regularly remove any debris, dirt, or bird droppings from the awning fabric to prevent staining and potential damage. Use a mild soap solution and a soft brush to gently scrub the fabric and then rinse thoroughly with water. Proper Storage When not in use, it’s important to store your Girard awning properly to protect it from unnecessary wear and tear. Proper storage includes retracting the awning in adverse weather conditions and placing it in a secure, dry location. Avoid leaving the awning exposed to the elements for extended periods, as this can lead to fading and deterioration of the fabric and components. Annual Inspection An annual inspection is a critical part of preventive maintenance for your Girard awning. Each year, thoroughly examine the awning for any signs of wear, tear, or damage. Check the motor, fabric, arms, and other components for any issues, and promptly address any concerns to prevent further damage. Additionally, ensure all bolts and hardware are tightened and secure to maintain the awning’s structural integrity. By prioritizing these preventive maintenance tips, you can extend the lifespan of your Girard awning and ensure it continues to provide shade and protection for years to come.
Girard Awning Adjustment Troubleshooting: Ultimate Tips for Success


Frequently Asked Questions Of Girard Awning Adjustment Troubleshooting

What Are The Common Issues With Girard Awnings?

Girard awnings may have issues with motor, fabric, or alignment. Common problems include stuck mechanisms, frayed fabric, or misalignment causing difficulties with extending or retracting the awning.

How Can I Troubleshoot A Girard Awning Adjustment?

To troubleshoot a Girard awning, start by checking the power source, ensuring the fabric is not obstructed, and examining the alignment of the awning. If issues persist, consult the manufacturer’s manual or seek assistance from a professional technician.

What Are The Recommended Maintenance Tips For Girard Awnings?

Regularly cleaning the fabric, inspecting for any tears, and lubricating the moving parts are crucial maintenance activities for Girard awnings. Additionally, positioning the awning correctly and avoiding overexposure to harsh weather conditions can extend its lifespan.

How Can I Adjust The Settings Of A Girard Awning?

To adjust the settings of a Girard awning, consult the manual for specific instructions on modifying the extension, retraction, and tilt angles. Ensure that proper care and attention are given to prevent any damage during the adjustment process.


To ensure optimal performance and convenience, troubleshooting Girard awning adjustments is crucial. By following these steps, you can resolve common issues such as improper extension/retraction or difficulty in operation. Regular maintenance and adjustments are necessary to enhance the longevity and functionality of your awning.

Don’t let minor problems hinder your enjoyment; take the time to troubleshoot and make necessary adjustments. Enjoy effortless outdoor comfort with a properly functioning Girard awning!